Bosch B9512G - Operations; Silencing Alarms; Silencing Troubles; Arming and Disarming

28
en | Operations Control panels
2018.07 | 01 | F.01U.352.527 Bosch Sicherheitssysteme GmbH
6
Operations
The operations listed below, with the exception of those relating to
user settings (section 6.6) and settings (section 6.8), are performed
with a keypad. For other type of credentials, contact your installer.
6.1
Silencing alarms
1. To silence an alarm, enter your passcode.
2. Press [ENTER].
P The alarm is silenced.
6.2
Silencing troubles
1. To silence a trouble, enter your passcode.
2. Press [ENTER].
P The trouble is silenced.
6.3
Arming and disarming
All arm the premises to detect a would-be intruder, when you leave the
premises and require that all points are activated in a ready state.
Part arm the perimeter and unused parts of the premises as defined by
the installer to detect a would-be intruder, while at the same time being
able to move freely within an area that is not armed.
6.3.1
All arming, delay
All arming the premises with exit delay time gives you time to leave the
premises without sounding the alarm.