Bosch B9512G - Bypassing

Control panels Operations | en
35
Bosch Sicherheitssysteme GmbH 2018.07 | 01 | F.01U.352.527
How to disarm an area with B92x / B91x
1. Open the menu. Refer to B92x / B91x keypads menu and navigation,
page 23.
2. Press 1 to open the [On/Off] menu.
3. Press 3 to select [Off].
4. Press 2 to select [Turn Off Select Area].
5. Enter your passcode.
6. Press [ENTER].
7. To select the area, use [PREV] and [NEXT].
8. Press [ENTER].
P The area or areas are disarmed.
6.4
Bypassing
Bypass a point or points to disable them for one arming cycle. After one
arming cycle, the point or points are automatically unbypassed.
6.4.1
Bypassing a point
How to bypass a point with B94x / B93x
1. Open the menu. Refer to B94x / B93x keypads menu and navigation,
page 20.
2. Press [On/Off].
3. Press [Bypass].
4. Press [Bypass Points].
5. Enter your passcode.
6. Press [ENTER].
7. To select a point, use [PREV] and [NEXT].
8. Press [Bypass].
P The point is bypassed.