Bosch B9512G - Resetting Sensors

Control panels Operations | en
37
Bosch Sicherheitssysteme GmbH 2018.07 | 01 | F.01U.352.527
4. Press 2 to open the [Unbypass Points] menu.
5. Enter your passcode.
6. Press [ENTER].
7. To select a point, use [PREV] and [NEXT].
8. Press [ENTER].
P The point is unbypassed.
6.5
Resetting sensors
After an alarm or trouble, sensors have to be reset so that they can go
back to the normal state.
Preparations
4 Make sure that no danger, such as smoke, fire or an intruder is
present in the premises.
How to reset sensors with B94x / B93x
1. Open the menu. Refer to B94x / B93x keypads menu and navigation,
page 20.
2. Press [Actions].
3. Press [Reset].
P The sensors are reset.
P The system is ready to be armed.
How to reset sensors with B92x / B91x
1. Open the menu. Refer to B92x / B91x keypads menu and navigation,
page 23.
2. Press 3 to open the [Actions] menu.
3. Press 1 to select [Reset].
P The sensors are reset.
P The system is ready to be armed.