Bosch B9512G - Page 39

Control panels Operations | en
39
Bosch Sicherheitssysteme GmbH 2018.07 | 01 | F.01U.352.527
P A new user has been added and is ready to be configured.
6.6.2
Editing a user
Preparations
Every user has a number assigned (up to 10-2000, depending on the
control panel series). You need to know which number is assigned to a
user to edit the user. If you do not know which number is assigned,
contact your installer.
Every user has a user level (1 - 14) assigned. If you do not know the
scope of authority of each level, contact your installer.
How to edit a user with B94x / B93x
1. Open the menu. Refer to B94x / B93x keypads menu and navigation,
page 20.
2. Press [Users].
3. Press [Edit User].
4. Enter your passcode.
5. Press [ENTER].
6. Enter the number of the user you want to edit.
7. Press [Continue].
How to change the passcode with B94x / B93x
1. Press [Passcode].
2. Enter the new passcode (3 to 6 digits) of the user.
3. Press [ENTER].
4. Enter the new passcode of the user again.
5. Press [ENTER].
P The passcode is changed.
How to change the user name with B94x / B93x
1. Press [Name].