Bosch BasicDome Series - Display Setup; Communication Setup; Language Setup

Indoor Pendant & In-ceiling Models | Instruction Manual | Advanced Menu
Bosch Security Systems | 10 December 2003
EN
|
18
DISPLAY SETUP
Title OSD – Controls whether sector or shot title are displayed. The Factory Default* setting is ON.
Choices:
*On . . . . . . . . . . . . . . .Titles are displayed.
Off . . . . . . . . . . . . . . .Titles are hidden.
Camera OSD – Controls whether the camera information is displayed (such as digital zoom, Iris OPEN/close, etc.).
The Factory Default* is ON.
Choices:
*On . . . . . . . . . . . . . .Camera Commands are displayed.
Off . . . . . . . . . . . . . . .Camera commands are hidden.
Display Adjust – Adjusts the vertical position of the on-screen display. See the on-screen display for instructions.
Sector Blanking – Selects sectors for video blanking. Sectors available are 1 to 16. See the on-screen display for
instructions.
COMMUNICATION SETUP
Baud Rate – Controls baud rate for BasicDome communication in the Normal mode. The Factory Default* is 9600.
Choices: . . . . . . . . . . . . . . 9600, 19200, 38400, 57600.
LANGUAGE SETUP
Language – Selects the language to be displayed.
Choices: . . . . . . . . . . . . . .English, Spanish, French, German, Portuguese, and Polish.