To Next PageTo Next PageHow to fix ignition failure in my Bosch BC3200RA?
If your Bosch Water Heater experiences ignition failure, first check if the gas supply is on. Then, reset the system by turning the remote controller's power off and on. If the error disappears after the hot water runs, it's fixed. If the problem continues, it is advisable to call for service.
What to do if my Bosch BC3200RA shows Combustion Abnormality?
If your Bosch Water Heater shows a combustion abnormality because the burner sensor detects high temperature, reset the system by turning the main power off and on. If the error persists, it is advisable to call for service.
General| Fuel Type | Natural Gas |
|---|---|
| Energy Factor | 0.62 |
| Thermostat | Adjustable |
| Gas Connection | 1/2 inch |
| Voltage | 120V (for electronic ignition) |
| Material | Glass-lined |
Defines safety alert symbols and risk level icons (DANGER, WARNING, CAUTION).
Emphasizes checking bathwater temperature to prevent scalding.
Guides on running hot water using the RCS3211 controller.
Provides safety warnings for hot water usage with the RCS3211.
Explains how to adjust temperature with the RCS3211 controller.
Safety warnings for hot water usage without a controller.
Explains freeze prevention heaters and insulation for cold weather.
Steps to follow if the unit or pipes freeze.
Crucial DANGER warning about filling the neutralizer unit with water.
Lists periodic checks for combustible materials, soot, leaks, and blockages.
Lists common temperature-related issues and their solutions.
Explains error codes displayed on the remote controller and their remedies.
Explains the meaning of the combustion lamp status (blinking, lit, unlit).
Provides instructions on how to request service and information needed.
Lists detailed technical specifications of the water heater.
Outlines warranty periods, what is covered, and exclusions.
