1414
Operating Instructions
On this Display Operation Description
1
2
Setting Hot Water Temperature
Use the
buttons to adjust
the temperature.
Press the
ON/OFF
button to turn it
“On”.
* The
ON/OFF
is lit.
When using RCM3211
(Eg.: 40°C)
Here
When the user is taking the shower, it will be dangerous if some-
one else presses the sub remote controller to change the tem-
perature or to turn off the power switch.
WARNING
This is to prevent scalding if the temperature rises. Conversely, if the temperature drops or the
power switch is turned “off”, the user may be upset when the water suddenly becomes much colder.
To Next Page
Loading...
