Bosch BC3200RA - Filling the Bath; Bathwater Temperature Safety

1616
Operating Instructions
On this Display Operation Description
Filling Up the Bath
Insert the bathplug into the plughole.
Preparation
1
Press the
ON/OFF
button
to turn it “On”.
* The
ON/OFF
is lit.
2
Turn on hot water.
(Display example)
* Please set to the
required temperature
when using
thermostat controlled
water mixing valves.
the highest
temperature
3
When the bath is full,
turn off the taps.
WARNING
Check the bathwater temperature with your hand be-
fore getting into the bath.
To prevent scalding.
Check
When using RCM3211