Bosch BSA 43 Series - Components; Master Switch Box; Analog Display; Infrared (IR) Remote Control Unit

1 691 606 210 2010-09-21| Robert Bosch GmbH
Product description | BSA 43xx | 19BSA 43xx | 19 | 19
en
3.6 Components
3.6.1 Master switch box
The master switch box contains the master switch for
activation and deactivation and supplies the device
with power.
1
2
952000 -02_IN
Fig. 2: Master switch box (standard)
1 Master switch with EMERGENCY STOP function
2 Inputs and outputs for power and data cables
3.6.2 Infrared (IR) remote control unit
The infrared remote control is used for control com-
mands, data entries and program modifications. The
commands are relayed via the infrared receiver on the
analog display to the dynamometer control system.
i For further information see product description
(1 691 696 2151 691 696 215).
3.6.3 Analog display
The analog display of the BSA 43xx indicates measured values, operating statuses, fault statuses and messages. For
operation and details of the elements, refer to the operating instructions for the BSA 43xx.
Fig. 3: Elements of analog display 8 kN
2
7
5
6
1
4
3
Fig. 4: Elements of analog display 2 x 8 kN