Bosch Bulls Aminga E1 - 11.2 Assembly Report

To Next Page

To Previous Page

MY20B01-32_1.0_21.06.2019

Documents

11 Documents

11.1 Parts list

There was no information relating to a parts list

yet at the time of going to press. You'll find the

information in the latest operating instructions.

Main Page

Table of Contents2
About These Operating Instructions Manufacturer6
Type Number and Model6
Identifying the Operating Instructions8
Laws, Standards and Directives8
Subject to Change8
Language8
For Your Safety8
Instruction, Training and Customer Service9
Basic Safety Instructions9
Warnings9
Safety Markings9
For Your Information9
Instructions for Actions9
Language Conventions10
Information on the Nameplate10
Nameplate11
Safety12
General Warnings12
Toxic Substances13
Requirements for the Rider14
Protection for Vulnerable Groups14
Data Privacy14
Personal Protective Equipment14
Safety Markings and Safety Instructions14
Emergency What to Do in an Emergency15
First Aid Treatment15
Fighting Fire15
Leaking Fluids16
Brake Fluid16
Oils and Lubricants from the Fork16
Oils and Lubricants from the Rear Frame16
Damper16
Overview17
Description18
Wheel and Suspension18
Valve18
Suspension18
Steel Suspension Fork Structure19
Air Suspension Fork Structure19
Structure of the FOX Rear Frame Damper20
Structure of the Suntour Rear Frame20
Brake System20
Rim Brake20
Disc Brake21
Back-Pedal Brake21
Abs22
Electric Drive System23
Rechargeable Battery23
Pannier Rack Battery24
Integrated Battery25
Control Panel with Display25
Riding Light26
Charger26
Proper Use27
Improper Use28
Technical Data29
Pedelec29
Activeline Motor29
Activeline Plus Motor29
Performance Line Cruise Motor29
Performance Line Speed Motor29
Performance Line CX Motor29
Lighting30
Powerpack 300 Battery30
Powerpack 400 Battery30
Powerpack 500 Battery30
Powertube Battery30
Purion Display30
USB Port30
BOSCH Pedelec ABS BAS10031
Emissions31
Tightening Torque31
Environmental Requirements32
Description of Controls and Screens34
Handlebars34
Battery Level Indicator34
Control Panel On-Screen Indicators34
Unit of Measure for Speed34
Tachometer Screen34
Function Display34
Gear Recommendation35
Tachometer Screen35
Function Display35
System Message37
ABS Indicator Lamp38
Transporting and Storing39
Physical Transport Characteristics39
Dimensions During Transportation39
Transport Weight39
Designated Handles/Lifting Points39
Transporting39
Transporting the Battery40
Shipping the Battery40
Using the Brake Transport Securing System40
Storing40
Break in Operation41
Preparing a Break in Operation41
Taking out of Operation41
Assembly42
Required Tools42
Unpacking42
Scope of Delivery42
Commissioning43
Checking the Battery43
Installing the Wheel in the Suntour Fork43
Installing the Wheel with Screw-On Axle43
(15 MM)43
Installing the Wheel with Screw-On Axle44
(20 MM)44
Installing the Wheel with a Quick Release46
Installing the Wheel in the FOX Fork47
Wheel with Quick Release (15 MM)47
Adjusting the FOX Quick Release48
Installing the Wheel with Kabolt Axles48
Checking the Stem and Handlebars48
Pedelec Sale49
Operation50
Risks and Hazards50
Tips for a Greater Range51
Personal Protective Equipment51
Error Messages52
Error Message Display52
Battery Error Message54
Before the First Ride55
Adjusting the Saddle55
Adjusting the Saddle Tilt55
Determining the Seat Height55
Adjusting the Seat Height with Quick55
Release55
Height-Adjustable Seat Post56
Adjusting the Seat Position56
Adjusting the Handlebars57
Adjusting the Stem57
Adjusting the Height of the Handlebars57
Turning the Handlebars to the Side57
Checking the Clamping Force in Quick58
Adjusting the Quick Release Clamping58
Adjusting the Brake Lever58
Adjusting the Pressure Point on a58
Adjusting the Grip Distance58
Magura Brake Lever58
Adjusting the Suspension of the59
Suntour Fork59
Adjusting the Negative Deflection59
Adjusting the Air Suspension Fork Negative Deflection60
Adjusting the Steel Suspension Fork Negative Deflection60
Adjusting the Rebound61
Adjusting the Suspension of the FOX Fork61
Adjusting the Negative Deflection61
Adjusting the Rebound62
Setting the Suntour Rear Frame Damper63
Adjusting the Negative Deflection63
Adjusting the Rebound63
Setting the Compression63
Setting the FOX Rear Frame Damper64
Adjusting the Negative Deflection64
Adjusting the Rebound64
Retracting the Brake Linings65
Accessories66
Child Seat66
Bicycle Trailers67
Pannier Rack67
Before each Ride68
Check List before each Ride68
Using the Kickstand69
Raising the Kickstand69
Parking the Pedelec69
Using the Pannier Rack69
Rechargeable Battery70
Frame Battery71
Removing the Frame Battery71
Inserting the Frame Battery71
Pannier Rack Battery71
Removing the Pannier Rack Battery71
Inserting the Pannier Rack Battery71
Integrated Battery71
Removing the Integrated Battery71
Inserting the Integrated Battery72
Charging the Battery72
Charging the Dual Battery73
Charging Process When Two Batteries Are Used73
Charging Process When One Battery Is Used74
Waking the Battery74
Electric Drive System75
Switching on the Electric Drive System75
Switching off the Drive System75
Control Panel with Display76
Using the USB Port76
Replacing the Battery76
Overview of Actions77
Switching on the Display77
Switching off the Display77
Using the Push Assist System77
Using the Riding Light78
Selecting the Level of Assistance78
Journey Information78
Resetting the Trip Distance78
Resetting the Range78
Changing the Tachometer from Kilometres to Miles78
Displaying Versions and Type Numbers78
Brake79
Using the Brake Lever80
Using the Back-Pedal Brake81
Using ABS81
While Riding82
Suspension and Damping82
Adjusting the Compression of the82
Fox Fork82
Adjusting the Compression of the Fox Damper83
Adjusting the Compression of a83
Suntour Damper83
Adjusting the Rebound in a Rock84
Shox Damper84
Adjusting the Compression in a84
Rock Shox Damper84
Gear Shift84
Using the Derailleur Gears85
Using a Hub Gear85
Use Eshift85
Eshift with Shimano DI2 Automatic Hub Gears86
Hub Gears86
Eshift with Manual Shimano DI286
Eshift with Nuvinci H|Sync/Enviolo with Optimized H|Sync86
Eshift with Rohloff E-14 Speedhub86
Cleaning and Servicing87
Cleaning after each Ride87
Cleaning the Suspension Fork87
Cleaning the Rear Frame Damper87
Cleaning the Pedals87
Basic Cleaning88
Cleaning the Frame88
Cleaning the Stem88
Cleaning the Rear Frame Damper88
Cleaning the Wheel88
Cleaning the Drive Elements88
Cleaning the Chain89
Cleaning the Battery89
Cleaning the Display89
Cleaning the Drive Unit89
Cleaning the Brake90
Servicing90
Servicing the Frame90
Servicing the Stem90
Servicing the Fork90
Servicing the Drive Elements90
Servicing the Pedals90
Servicing the Chain90
Maintenance91
Wheel91
Checking the Tyres91
Checking the Rims91
Check and Correct Tyre Pressure91
Dunlop Valve91
Presta Valve92
Schrader Valve92
Brake System92
Checking the Brake Linings for Wear92
Checking the Pressure Point92
Checking the Brake Discs for Wear93
Electrical Cables and Brake Cables93
Gear Shift93
Stem93
USB Port93
Checking the Belt and Chain Tension93
Checking the Handlebar Grip Position93
Maintenance94
Axle with Quick Release95
Checking the Quick Release95
Adjusting the Gear Shift95
Cable-Operated Gear Shift, Single-Cable96
Cable-Operated Gear Shift, Dual-Cable96
Cable-Operated Twist Grip, Dual-Cable96
Troubleshooting, Fault Clearance and Repair97
Troubleshooting and Fault Clearance97
The Drive System or Display Do Not Start up97
Error Messages97
Repair98
Use Original Parts and Lubricants Only98
Replacing the Lighting98
Setting the Headlight98
Recycling and Disposal99
Documents100
Parts List100
Assembly Report101
Maintenance Log103
Charger Operating Instructions106
Keyword Index115
Glossary116
Appendix119
Translation of the Original EC Declaration of Conformity119

Bosch Bulls Aminga E1 - 11.2 Assembly Report

Table of Contents

Related product manuals