MY20B01-32_1.0_21.06.2019
3
Contents
6.12 Using the push assist system 76
6.12.1 Using the riding light 77
6.12.2 Selecting the level of assistance 77
6.12.3 Journey information 77
6.12.3.1 Resetting the trip distance 77
6.12.3.2 Resetting the range 77
6.12.3.3 Changing the tachometer from
kilometres to miles 77
6.12.3.4 Displaying versions and type numbers 77
6.13 Brake 78
6.13.1 Using the brake lever 79
6.13.2 Using the back-pedal brake 80
6.13.3 Using ABS 80
6.13.3.1 While riding 81
6.14 Suspension and damping 81
6.14.1 Adjusting the compression of the
Fox fork 81
6.14.2 Adjusting the compression of the
Fox damper 82
6.14.3 Adjusting the compression of the
Suntour fork 82
6.14.4 Adjusting the compression of a
Suntour damper 82
6.14.5 Adjusting the rebound in a Rock
Shox damper 83
6.14.6 Adjusting the compression in a
Rock Shox damper 83
6.15 Gear shift 83
6.15.1 Using the derailleur gears 84
6.15.2 Using a hub gear 84
6.15.3 Use eShift 84
6.15.3.1 eShift with Shimano DI2 automatic
hub gears 84
6.15.3.2 eShift with manual Shimano DI2
hub gears 85
6.15.3.3 eShift with Shimano DI2 automatic
hub gears 85
6.15.3.4 eShift with NuVinci H|Sync/enviolo
with Optimized H|Sync 85
6.15.3.5 eShift with Rohloff E-14 Speedhub
500/14 85
7 Cleaning and servicing 86
7.1 Cleaning after each ride 86
7.1.1 Cleaning the suspension fork 86
7.1.2 Cleaning the rear frame damper 86
7.1.3 Cleaning the pedals 86
7.2 Basic cleaning 87
7.2.1 Cleaning the frame 87
7.2.2 Cleaning the stem 87
7.2.3 Cleaning the rear frame damper 87
7.2.4 Cleaning the wheel 87
7.2.5 Cleaning the drive elements 87
7.2.6 Cleaning the chain 88
7.2.7 Cleaning the battery 88
7.2.8 Cleaning the display 88
7.2.9 Cleaning the drive unit 88
7.2.10 Cleaning the brake 89
7.3 Servicing 89
7.3.1 Servicing the frame 89
7.3.2 Servicing the stem 89
7.3.3 Servicing the fork 89
7.3.4 Servicing the drive elements 89
7.3.5 Servicing the pedals 89
7.3.6 Servicing the chain 89
7.3.7 Servicing the drive elements 89
7.4 Maintenance 90
7.4.1 Wheel 90
7.4.2 Checking the tyres 90
7.4.3 Checking the rims 90
7.4.4 Check and correct tyre pressure 90
7.4.4.1 Dunlop valve 90
7.4.4.2 Presta valve 91
7.4.4.3 Schrader valve 91
7.4.5 Brake system 91
7.4.6 Checking the brake linings for wear 91
7.4.7 Checking the pressure point 91
7.4.8 Checking the brake discs for wear 92
7.4.9 Electrical cables and brake cables 92
7.4.10 Gear shift 92
7.4.11 Stem 92
7.4.12 USB port 92
7.4.13 Checking the belt and chain tension 92
7.4.14 Checking the handlebar grip position 92
8 Maintenance 93
8.1 Axle with quick release 94
8.1.1 Checking the quick release 94
8.2 Adjusting the gear shift 94
8.2.1 Cable-operated gear shift, single-cable 95
8.2.2 Cable-operated gear shift, dual-cable 95
8.2.3 Cable-operated twist grip, dual-cable 95
9 Troubleshooting, fault clearance
and repair 96
9.1 Troubleshooting and fault clearance 96
9.1.1 The drive system or display do not
start up 96
9.1.2 Error messages 96
9.2 Repair 97
9.2.1 Use original parts and lubricants only 97
9.2.2 Replacing the lighting 97
9.2.3 Setting the headlight 97
10 Recycling and disposal 98
11 Documents 99
11.1 Parts list 99
11.2 Assembly report 100
11.3 Maintenance log 102
To Next Page
Loading...
