6 720 862 437 (2016/10)
RDCI Series – All DC Inverter Outdoor Units
6 | OUTDOOR UNIT INSTALLATION
• Two rows
• More than two rows
■ If the minimum clearance of 800mm above the unit can not be met,
see the figure below.
■ Ensure the surroundings are no more than 800mm high. If this is not
possible install mechanic exhaust device.
4.8 Set the snow-proof facility
■ In snowy areas, precautions should be taken to avoid unit failure or
lack of performance.
4.9 Explanation of valve
Table.4-4
Low-pressure gas pipe
Oil balance pipe
High-pressure gas balance pipe
Liquid pipe
High-pressure gas pipe
■ Installation illustration
Fig. 4-14
Front
100-500mm
Front
Front Front
>1m
>1m
>1m
>1m
>800mm
Fig. 4-15
Front
100-500mm
Front Front
Front Front
Front
>1m
>1m
>800mm
>1m>1m>1m
Fig. 4-16
Front
100-500mm
Front
>1m
>1m>1m
A
B
C
D
B
A
B
A
C
D
B
A
Fig. 4-17
Front view
Front view
Side view
Front view
>45° >300mm
>1000mm Airflow deflector
1
2
3
4
5
Fig. 4-19
Notes: 16HP as an example
1210
C
A
725
B
001
Fig. 4-20
Fig. 4-21
Example A
Support
Radius
Air outlet louver dimension (optional)
To Next Page
Loading...
