RDCI Series – All DC Inverter Outdoor Units
6 720 862 437 (2016/10)
OUTDOOR UNIT INSTALLATION | 7
■ Curve diagram of static pressure, air flow volume.
Table.4-5 Unit: mm Table.4-6 Unit: mm
A A≥300 A A≥300
B B≥250 B B≥250
C C≤3000 C C≤3000
D 750≤D≤760
θ
θ≤15°
θ
θ≤15°
NOTE
■ Before installing the air deflector, please ensure the fan grill has
been taken off.
■ Once air deflector has been installed, the air volume, cooling/
heating capacity will decrease. The maximum angle allowed for the
shutter is 15 degrees.
■ Only one bend set is allowed.
■ Install anti vibration pads in between the unit and air deflector.
Fig. 4-22
12 ST3.9 self-threading screws
Remove the fan grills
10
01
12-Ø3.2
393
567
1250
411 411213
411 411213
Fig. 4-23
9500
10000
10500
11000
11500
12000
12500
0 5 10 15 20 25
Fig. 4-24
8/10HP
Air pressure curve diagram
(Remove the fan grills)
Air volume (m
3
/h)
Static pressure (Pa)
10500
11000
11500
12000
12500
13000
13500
0 5 10 15 20 25
Fig. 4-25
12HP
Air pressure curve diagram
(Remove the fan grills)
Air volume (m
3
/h)
Static pressure (Pa)
12500
13000
13500
14000
14500
15000
15500
0 5 10 15 20 25
Fig. 4-26
14/16HP
Air pressure curve diagram
(Remove the fan grills)
Air volume (m
3
/h)
Static pressure (Pa)
B
0921
C
1210
A
Fig. 4-27
Example B
Support
Radius
Air outlet louver dimension (optional)
725
Ø3.2
393
567
1250
411 411
213
411 411213
Fig. 4-28
Fig. 4-29
12 ST3.9 self-threading screws
Remove the fan grills
To Next Page
Loading...
