Bosch CLIMATE 5000 VRF RDCI Series - SBOX INSTALLATION; Main Body Installation; Hanging Screw Bolts; Dimensions and Figures

4. SBOX INSTALLATION
WARNING
4.1. Install the main body
4.1.1 Install appropriate fixings. Check the weight of the SBOX.
1. Select a suitable location for the SBOX to be installed.
4.1.2 Hoisting install the SBOX
1. Ensure you use appropriate lifting equipment when installing the SBOX.
2. Make sure you use a level when installing the SBOX. Failure to do so, will
cause water leaks and damage.
4.2. The installation of hanging screw bolts
The installation situations of hanging screw bolts refer to the following (Table
4-1 and 4-2)
CAUTION
• You must use fixings that are appropriate for the installation. Make sure the
fixings have been treated for rust.
• Prior to lifting the SBOX in place, pull on the frame to ensure the frame is
secure.
• Suspending bolts must be fixed, the fixing method as per guidelines
suggested by the manufacture.
4.3. Dimension Figure
Model A B C D E
SBOX01 630 600 225 490 310
SBOX02 & SBOX02E 630 600 225 490 310
SBOX04 & SBOX04E 960 600 225 820 310
SBOX06 960 600 225 820 310
Model F G H I
SBOX01 Φ19.1 Φ16 Φ9.52 Φ24.5
SBOX02 & SBOX02E Φ25.4 Φ19.1 Φ12.7 Φ24.5
SBOX04 & SBOX04E Φ32 Φ22 Φ16 Φ24.5
SBOX06 Φ32 Φ22 Φ16 Φ24.5
Model J K
SBOX01 7/8”14UNF-2A 5/8”18UNF-3A
SBOX02 & SBOX02E 7/8”14UNF-2A 5/8”18UNF-3A
SBOX04 & SBOX04E 7/8”14UNF-2A 5/8”18UNF-3A
SBOX06 7/8”14UNF-2A 5/8”18UNF-3A
H
G
F
I
C
E
J
K
D
A
B
Fig.4-1
Table:4-3
CLIMATE 5000 VRF 6720862460 (16/04)
SBOX INSTALLATION | 5