CLIMATE 5000 RAC SINGLE SPLIT (R32) – 6720894076 (2019/08) 35
Maintenance and Disassembly
2) Disconnect the connectors (see fig.61).
Fig. 61.
3) Remove the hex nuts and washers securing the compressor,
located on the bottom plate (see fig.62).
Fig. 62.
4) Heat up the brazed parts and then remove the the discharge pipe
and the suction pipe (see fig.63).
5) Lift the compressor from the base pan assembly with pliers.
Discharge Pipe
Suction Pipe
Fig. 63.
NOTICE:
This section is for reference only. Actual unit appearance may vary.
To Next Page
Loading...
