Bosch Climate 5000 - Page 19

Climate 5000 8736862495(2015/07)
Unit maintenance | 19
No.
Inspection and
maintenance items
Maintenance measures
1
M
3
M
6
M
1
Y
2
Y
Remarks
Inspection and
maintenance
intervals
9.3
Check the abnormal noise,
heat, etc. of the bearing
△
Refill in
accordance
with manu-
facturer
requirement
9.4
Check the vibration and
wearing condition of the fan
axle
△
9.5
Check the leakage of the soft
connections
△
9.6
Check the damping state of
the shock absorber
△
9.7
Check the tightness of the
fan fastening bolts
△
10 Drive components
10.1 Motor
10.1.1
Check the scale on the motor
surface
Clean
△
10.1.2 Measure voltage Record measured value
△
10.1.3 Measure consumed power Record measured value
△
10.1.4 Check the bearing noise
△
10.1.5
Check the vibration and
abnormal noise of the motor
bearing
△
10.2 Belt drive
Only for
the unit
with belt
driven fan
10.2.1
Check the belt tension and
parallelism
Adjust in accordance with
the inspection
△
10.2.2
Check the wearing condition
of the belt
△
10.2.3
Adjust or replace belt in
accordance with conditions
★
10.2.4
Check the tightness of the
axle key
△
10.2.5
Check the wearing condition
of the pulley
△
Tab. 6-3 Inspection and maintenance items 3