14 en | Configuration Conettix Cellular Communicators
2020.02 | 04 | F.01U.345.070 Installation Manual Bosch Security Systems B.V.
5 Configuration
Communicator programming is done through the compatible control panel, plug-in
communicator interface, or universal dual path communicator. Refer to the documentation of
these devices or remote programming software help for more information. For Bosch Cellular
account status and management, use RPS or the online service portal (go to http://
www.conettix.com/plansandrecommendedsettings and click on the Cellular Portal Login link).
Configure network alarm communication routes and settings in the control panel. Cellular
carrier specific settings such as Access Point Name and SIM card security can also be
programmed through the control panel or Conettix Plug-in Communicator Interface.
5.1 Activating the B444-A/B444-V
The B444-A and B44-V communicator requires a valid Bosch Installer Services account and
must be activated with a valid cellular plan for proper usage. If your device requires activation:
– contact Bosch Installer Services by submitting a support ticket via the Bosch Cellular
Portal email at: installer.services@us.bosch.com, or
– call Bosch Installer Services (800-289-0096).
Please provide the IMEI and ICCID numbers found on the box or on the communicator for
proper activation.
To Next Page
Loading...
