Bosch CR 50 - DHW settings; Setting the time program

6720856748 (2016/03)CR50
Operating the appliance | 5
▶ Adjust and confirm the desired room temperature for the
selected operating mode.
The setting value stops flashing.
Enable manual operation and set the desired room
temperature
If you require a room temperature for a period of time which
deviates from the temperatures set for heating or setback:
▶ Press the man key.
The user interface will now constantly maintain the set
temperature entered for manual operation.
▶ Wait a few seconds until the default display appears again
or confirm twice.
▶ Set and confirm the desired room temperature (or wait a
few seconds).
The setting value stops flashing. The user interface
operates permanently and for an unlimited period of time
with the modified setting (without setback).
4.2 DHW settings
Activate once-only cylinder charging (hot water immediate
function)
If you need hot water outside of the times set in the time
program:
▶ Open the main menu.
▶ Select and confirm the DHW menu.
▶ Press the selector.
The current setting flashes.
▶ Select and confirm ON.
Water heating (tank heating or instantaneous flow heating)
becomes active immediately. After heat-up, once-only
cylinder charging switches off again.
Changing DHW temperature
If the hot water is too cold or too hot:
▶ Open the main menu.
▶ Select and confirm the DHW menu.
▶ Select and confirm the Temperature menu item.
The current setting flashes.
▶ Set and confirm the required DHW temperature.
If the maximum value of the hot water temperature exceeds
60 °C, the scalding warning flashes.
▶ Press the back key, set and confirm d60 °C.
-or-
▶ Confirm the setting > 60 °C.
4.3 Setting the time program
Open time program for several days for one individual
weekday
▶ Open the main menu.
▶ Select and confirm the Heating menu.
▶ Select and confirm the Time program menu.
The menu item Mon-Fri is displayed.
▶ Mon-Fri (change switching times for all weekdays
together) or Saturday ... Select and confirmed Friday
(change switching times for individual weekdays).
The menu item Heat begin1 is displayed.
0010006004-001
Setback
Setback
0010006005-001
Set room temp
Set room temp
0010006006-001
Loading once
Loading once
0010006007-001
Temperature
Temperature
0010006008-001
Scalding
Scalding
0010006009-001
Mon-Fri
Mon-Fri
0010006010-001
Heat begin1
Heat begin1