Bosch CR 50 - Setting up a holiday program

6720856748 (2016/03) CR50
6 | Operating the appliance
Set heat begin or setback begin earlier or later
(move switching time)
▶ Open time program for all weekdays or one weekday.
▶ Select and confirm the switching time.
The hour currently set for the switching time and the
associated segment in the segment display start to flash.
▶ Moving switching time to the desired time.
The setting in the value display changes in 15-minute
increments and in the segment display in 30-minute
increments.
▶ Confirm setting.
Add a new heating phase (such as Heat begin2 to Strt
setback2)
If all six switching times in the time program are not being used,
a new heating phase can be added.
▶ Open time program for all weekdays or one weekday.
▶ Select and confirm Heat begin2.
The new switching time is added. The hour and associated
segment in the segment display start to flash.
▶ Set the switching time for Heat begin2, such as 14:00, and
confirm.
The new heating phase is added with a duration of one half-
hour. Strt setback2 is set to 14:30. If necessary, move
Strt setback2 to, for example, 23:00.
Interrupt heating phase with setback phase (e. g. add
setback phase between Heat begin2 and Strt setback2)
▶ Open time program for all weekdays or one individual
weekday.
▶ Select Strt setback2 (end of the heating phase to be
interrupted).
▶Set Strt setback2 to the start of the interruption, such as
18:00.
▶ Add a new heating phase and set heat begin and setback
begin, such as Heat begin3 (21:00) to Strt setback3,
(23:00).
The user interface automatically sorts the heating phases
chronologically.
Delete new heating phase (such as Heat begin2 to Strt
setback2)
▶ Open time program for all weekdays or one individual
weekday.
▶ Select and confirm Strt setback2.
The hour currently set for the switching time and the
associated segment in the segment display start to flash.
▶Set Heat begin2 to the same time as Strt setback2.
Does Delete? appear in the text line?
▶ Confirm Delete? to delete the heating phase.
4.4 Setting up a holiday program
Open the vacation menu
▶ Open the main menu.
▶ Select and confirm the Holiday menu.
The menu item Holiday prog. is displayed.
Activate the holiday program and set the vacation time
▶ Select and confirm the Holiday menu until the OFF setting
value flashes.
0010006011-001
Strt setback1
Strt setback1
0010006012-001
Heat begin2
Heat begin2
0010006013-001
Strt setback2
Strt setback2
0010006014-001
Strt setback3
Strt setback3
0010006016-001
Delete?
Delete?
0010006017-001
Holiday prog.
Holiday prog.