6720856748 (2016/03)CR50
Operating the appliance | 7
▶ Select and confirm ON.
The holiday begin date (factory setting for 1st vacation day
= current date) and the vacation end date (factory setting
for last day = one week after the current date) are
displayed. The holiday start date flashes.
▶ Select and confirm the day for the holiday start.
The day is changed, and the month for the holiday start
flashes.
▶ Select and confirm the month for the holiday start.
The month is changed, and the day for the holiday end
flashes.
▶ Select and confirm the day for the holiday end.
The day is changed, and the month for the holiday end
flashes.
▶ Select and confirm the month for the holiday end.
The vacation program is activated automatically on the
holiday start date. The holiday period for the example
shown runs from 00:00 on 06/08/ to 24:00 on 21/08/.
Interrupt a holiday program
▶ Press the man key.
The user interface will now constantly maintain the set
temperature entered for manual operation. Hot water is
available only if once-only cylinder charging is active, or the
water heating operating mode is ON.
▶ If desired, set the required room temperature.
The user interface will now constantly maintain the new set
room temperature.
▶ Press the auto key to resume the holiday program.
Terminating the holiday program early
▶ Select and confirm the Holiday menu until the ON setting
value flashes.
▶ Select and confirm OFF.
The holiday program is ended prematurely. The setting
values are deleted.
4.5 More settings
Setting the time and date
▶ Open the main menu.
▶ Select and confirm the Settings menu.
▶ Select and confirm the Time/Date menu.
The menu item Time of day is displayed.
▶ Press the selector.
The hours start flashing.
▶ Set and confirm the hour.
The minutes start flashing.
▶ Set and confirm the minute.
▶ Select and confirm the Date menu item.
The date flashes (bear in mind the setting in the menu
Settings > Format > Date format).
▶ Set the day, month and year in the same way as the hours
and minutes.
▶ Press the selector.
The setting value stops flashing.
0010006019-001
20.07. - 27.07.
0010006020-001
06.08. - 27.07.
0010006018-001
06.08. - 21.08.
0010006021-001
12:55 We
0010006022-001
Holiday prog.
0010006025-001
Time of day
0010006026-001
Time of day
0010006024-001
20.07.2011
To Next Page
Loading...
