58
Robert Bosch Hausgeräte GmbH
en
Problem Cause Solution
Grinding level adjustment
is stiff�
Too many beans in the
grinding unit�
Dispensing a drink from
coffee beans� Only make any
subsequent changes to the
grinding level in small steps�
Brewing unit cannot be
inserted�
Brewing unit is in the wrong
position�
Insert the brewing unit
according to the instructions,
see the section “Cleaning the
brewing unit”�
Brewing unit is locked� Unlock the brewing unit, see
the section “Cleaning the
brewing unit”�
Protective cover of the
brewing unit cannot be prop-
erly attached�
Brewing unit is not locked� Lock the brewing unit, see
the section “Cleaning the
brewing unit”�
Display screen shows
“12:00”
Power failure or appliance
switched off at mains�
Re-enter values; do not
switch the appliance off at
the mains or select the “off”
option in the Clock displ�
menu�
Display shows
“Milk container connected?”
despite connected milk
container�
Container is outside the range
of the sensor�
Position the container at the
right edge�
Material e�g� milk carton is not
recognised�
Conrm the display request
with “Yes” or use the
enclosed milk container�
Display shows, for example:
“Fault: E0510”
The appliance has a fault� Proceed according to the
display screen�
Display shows
“Fill bean container”
although the container is
already full, or the grinder is
not grinding any beans�
Beans are not falling into the
grinding unit (beans too oily)�
Gently tap the bean
container� Possibly change
the type of coffee� When
the bean container is empty,
wipe it with a dry cloth�
Display shows
“Clean brewing unit”
Brewing unit is soiled� Clean the brewing unit�
Too much ground coffee in the
brewing unit�
Clean the brewing unit� Do
not place more than two level
measuring spoons of ground
coffee in the drawer�
The mechanism of the
brewing unit is stiff�
Clean the brewing unit, see
the section “Care and daily
cleaning”�
To Next Page
Loading...
Need help?
General
