43
CTL636E.. | 07/2014
en
Preparation using
coffee beans
The appliance must be ready for use�
● Place a cup underneath the beverage
outlet�
● Turn the control ring and select
“Ristretto”, “E spresso” or “Coffee”�
The display shows the selected drink along
with the preset values for the drink�
Y very strong
Coffee
very high O
R 160 ml off ^
F
The settings can be changed as
described in the section “Drink
adjustment”�
● Press C to start dispensing�
The coffee is brewed and then dispensed
into the cup�
Press C again to prematurely halt
dispensing�
Preparation using milk
This fully automatic coffee machine has
an integrated beverage outlet� This can be
used to prepare coffee drinks with milk or
also milk froth and warm milk�
B
Risk of burns!
The beverage outlet gets very hot�
After use, always let it cool down
before you touch it�
Milk container
The milk container has been designed
especially for use together with this fully
automatic coffee machine� It is intended
solely for use in the household and for
storing milk in the refrigerator� The insulated
container keeps milk cool for a number of
hours�
F
Important: Remove cups or
glasses before opening the door
in case they fall�
Connecting the milk container or a milk
carton:
● Open the appliance door�
● Remove the cover of the beverage outlet
towards the front�
● Connect and x the milk tubes and
connecting elements as illustrated�
● Attach the cover rmly from the front on
to the beverage outlet�
● Attach the suction pipe and insert into the
milk container or a milk carton�
● Close the appliance door�
F
For optimal milk froth quality, use
cold milk with a fat content of at least
1�5 % if possible�
To Next Page
Loading...
Need help?
General
