Fire System | User’s Guide | 5.0 Key Operation and Functions
Bosch Security Systems, Inc. | 8/06 | F01U011793B 18
When all devices return to normal, you can clear a fire alarm
or trouble from the keypad by pressing [ANNUNCIATOR
RESET]. Check to be certain that no smoke, fire, or other
danger is present.
If you cannot reset the detector or sensor,
contact your service company.
5.2.3 [TROUBLE SILENCE] Key
Pressing the [TROUBLE SILENCE] key silences a fire
trouble. If the fault condition is still present, the trouble tone
silences but the fire trouble indication continues to show on
the keypad. Press the [NEXT] key repeatedly to view all
devices that are not in a normal state. When all devices
return to normal, press [ANNUNCIATOR RESET] to clear
the fire trouble indication from the keypad.
5.2.4 [ANNUNCIATOR RESET] Key
Description
Pressing the [ANNUNCIATOR RESET] key clears all alarm,
trouble, and supervisory messages from the keypad if those
conditions have been restored. [ANNUNCIATOR RESET]
also clears the event memory that is available using the
[NEXT] and [PREV] keys, or through the VIEW MEMORY ?
function. When the keypad is cleared, it returns to idle text.
Thereafter, the [NEXT] and [PREV] keys and the VIEW
MEMORY ? function show NO EVENTS until another trouble
or alarm occurs. Using [ANNUNCIATOR RESET] does not
affect the VIEW LOG ? function. Refer to Section 11.2.1 VIEW
MEMORY ? on page 26 and Section 11.2.3 VIEW LOG ? on
page 29 for more information.
To Next Page
Loading...
