Bosch D1260 - 1 0 Introduction; Manual Organization; Other Documentation Referenced; Documentation Conventions

D1260/D1260B | Installation Guide | 1.0 Introduction
4 Bosch Security Systems | 9/04 | 48101E
1.0 Introduction
This manual refers to the following control panels:
D9412G, D7412G, D7212G, D9412, D7412, D9112,
and D7212. In the remainder of this manual, these
control panels are referred collectively as “Bosch
Control Panels.”
1.1 Manual Organization
This manual is divided into four sections:
Table 1: D1260/D1260B Installation Guide
Organization
Section Description
1 Introduction
2 Overview
3 Installation
4 Programming the Control Panel
1.2 Other Documentation Referenced
Throughout this manual, references are made to other
documentation. Refer to Table 2 for the part numbers
of the documentation that have additional information
about the D1260/D1260B Keypads.
Table 2: Other Referenced Documentation
Name of document Part Number
Security System User’s Guide
4998122475
D7212G Program Entry Guide
4998138538
D7212G Program Record Sheet
4998138542
D9412G/D7412G Program Entry Guide
47775
D9412G/D7412G Program Record
Sheet
47488
1.3 Documentation Conventions
1.3.1 Type Styles Used in this Manual
Bold text
Usually indicates selections that
you can use while programming
your control panel or an
important fact that you should
note.
Bold Italicized
Denotes notes, cautions or
warnings.
Italicized text
Refers you to a drawing, table,
another section of this
document, or another document.
Also used symbolizes names for
records that you will create.
Courier New
Text
Indicates what can appear on the
D1260/D1260B Keypads
display.
[CAPITALIZED
TEXT]
Indicates a specific key to press.
Example: …press the [ENTER]
key…
Keys to press in sequence
appears as [COMMAND] + [4]
FileNew
Describes a menu path in a
Windows-based application.
Example: …select FileNew
to create a new…
1.3.2 Tips, Important Notes, Cautions and
Warnings
Important Notes - Information for
successful operation and programming.
Also tips and shortcuts can be included
here.
Caution - These caution the operator that
physical damage to the program or
equipment might occur.
Warning - These warn of the possibility of
physical damage to the operator.