D7212GV2 | Operation and Installation Guide | 3.0 Overview
8 Bosch Security Systems, Inc. | 5/05 | F01U003805B
3.0 Overview
3.1 Configuration and Parts
Figure 1: System Configuration
Use keypads or keyswitches to arm the control
panel by area. Each control panel can have up to four
areas. Each area can have its own account number or
areas can be grouped together with a common account
number. Points of protection are assigned to areas.
Control
Panel
On-Board Points
1 to 8
D9131A Module connects
to a parallel printer to print
the event log.
DX4020 allows communication
over a Local or Wide Area network
(LAN/WAN).
D8129 OctoRelay provides alarm
and auxilliary relay output.
(Other functions available.)
D8125, D8125INV, or
D8125MUX Interface
used for point expansion.
Each D8128D OctoPOPIT combines
eight POPIT points in one module.
D8132 Modules (two 12 VDC, 7Ah batteries)
provide additional power for keypads and
other powered devices.
Table 2: Control Panel Capabilities
Features D7212GV2
Access Control
No
Arm/Disarm Passcodes
99
Cards/Tokens
N/A
Passcode-Protected Custom
Functions
4
Number of Printers 1
Number of Points 40
Number of Relays 24
Number of Areas 4
To Next Page
Loading...
