8. Configure the system using the Configuration Wizard.
See also:
Using Bosch VMS Configuration Wizard, page 13
Using Bosch VMS Configuration Wizard
Intended use for Configuration Wizard is the quick and easy configuration of a smaller system.
Configuration Wizard helps you to achieve a configured system including VRM, iSCSI system,
cameras, recording profiles and user groups.
User groups and their permissions are configured automatically. You can add or remove users
and set passwords.
Configuration Wizard can access Management Server only on the local computer.
You can save an activated configuration for backup purposes and import this configuration
later. You can change this imported configuration after import.
You must add iSCSI systems manually.
Configuration Wizard adds the local VRM automatically.
To achieve a quick configuration using the Configuration Wizard:
1. On the Bosch VMS default screen, double-click the Bosch VMS Wizard icon. The page is
displayed.
2. Run-through the following pages of the wizard.
Welcome page
If the connection to the Management Server cannot be established, a corresponding error
message is displayed. You cannot continue working with Configuration Wizard.
If VRM is not available on the computer, a corresponding error message is displayed. You
cannot continue working with Configuration Wizard.
If the license check fails, a corresponding error message is displayed. You cannot continue
working with Configuration Wizard.
4.4
DIVAR IP 3000 System setup - first steps | en 13
Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC
To Next Page
Loading...
