What to do if the Bosch Recording Equipment system status LED is solid red due to overheating?
If your Bosch Recording Equipment's system status LED is solid red, indicating an overheating condition, ensure that no cables are obstructing the airflow within the system. Also, verify that the fan is present and functioning correctly, the chassis cover is properly installed, and the ambient room temperature is not excessively high.
General| Model | DIP-4424IG-2HD |
|---|---|
| Type | Network Video Recorder |
| Channels | 24 |
| Hard Drive Bays | 2 |
| Max. Internal Storage | 12 TB |
| HDD Slots | 2 |
| Max HDD Capacity | 6 TB per HDD |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Storage Capacity | Up to 12 TB |
| Network Interface | 1x RJ-45 10/100/1000 Mbps |
| Power Supply | 100 to 240 VAC |
| Video Outputs | HDMI, VGA |
Details safety measures for power supply, grounding, and preventing electrical hazards.
Outlines ESD measures and safety guidelines for operating the device to ensure proper function.
Specifies safety procedures and cautions for servicing and maintaining the device.
Advises on measures to protect the system from unauthorized access and cyber threats.
Guides on installing pre-installed hard drives supplied by Bosch into the unit.
Provides instructions for installing third-party hard drives, including preparation and mounting.
Guides through the first login process and initial system configuration, including software installation.
Details the steps to configure the system for BVMS operation, including license agreement.
To Next Page