DIVAR IP all-in-one 4000 Troubleshooting | en 33
Bosch Security Systems B.V.
Installation manual
2022-10 | V02 | F.01U.407.904
7 Troubleshooting
Overheating
Problem Solution
An overheating condition has occurred.
The system status LED is solid red.
– Make sure that no cables obstruct the
airflow in the system.
– Make sure that the fan is present and
operating normally.
– Make sure that the chassis cover is
installed properly.
– Make sure that the ambient room
temperature is not too high.
To Next Page
Loading...
