Bosch DIVAR IP all-in-one 4000 User Manual

DIVAR IP all‑in‑one 4000
DIP‑4420IG‑00N | DIP‑4424IG‑2HD | DIP‑4428IG‑2HD |
DIP‑442IIG‑2HD
en
Installation manual

Bosch DIVAR IP all-in-one 4000 Specifications

General

Model	DIVAR IP all-in-one 4000
Series	DIVAR IP
Storage Capacity	Up to 48 TB
Power Supply	100-240 VAC
Operating System	Linux
Pre-installed VRM	Yes
Recording Resolution	up to 12 MP
Video Channels	16
Storage	HDD
Video Compression	H.265, H.264, MJPEG
Network Interface	Gigabit Ethernet
RAID Support	RAID 0, 1, 5, 10
Number of Channels	16
Audio Support	Two-way audio
Operating Temperature	0 °C to +40 °C

Summary

Safety

Safety message explanation

Explains the meaning of safety icons and warnings.

Installation precautions

Lists precautions for installing the device safely.

Electrical safety precautions

Details electrical safety measures to prevent shock and fire hazards.

ESD precautions

Provides guidelines for preventing electrostatic discharge damage.

Operating precautions

Outlines precautions for safe operation of the device.

Service and maintenance precautions

Advises on safe servicing and maintenance procedures.

Cybersecurity precautions

Lists measures to protect the system from cybersecurity threats.

FCC compliance

States compliance with FCC rules regarding interference.

Software precautions

Advises on using the latest software for optimal performance and security.

Use latest software

Emphasizes the importance of installing and updating software regularly.

OSS information

Provides information on Open Source Software used in the product.

Introduction

Parts included

Lists the components included in the product package.

Product registration

Guides on how to register the product for support and warranty.

System overview

Device views

Describes the physical appearance and components of the device.

Control panel elements

Describes the buttons and LEDs on the device's control panel.

Hard drive tray LEDs

Explains the LEDs on the hard drive trays.

LAN LEDs

Describes the LEDs for the LAN ports and their meanings.

Installing a SATA hard drive

Installing a Bosch-supplied hard drive

Details the procedure for installing Bosch-supplied hard drives.

Installing a non-Bosch-supplied hard drive

Outlines the steps for installing non-Bosch-supplied hard drives.

Turning on the unit

System setup

Default settings

Lists the default IP addresses, subnet masks, and administrator credentials.

Prerequisites

Lists requirements before starting the system setup process.

Operation modes

Describes the different operating modes available for the system.

First sign-in and initial system setup

Details the steps for the first login and initial system configuration.

Choosing operation mode BVMS

Explains how to select and install the BVMS operation mode.

Choosing operation mode VRM

Explains how to select and install the VRM operation mode.

Choosing operation mode iSCSI storage

Explains how to select and install the iSCSI storage expansion mode.

Signing in to the administrator account

Describes how to sign in to the administrator account for different modes.

Configuring new hard drives

Guides on how to configure newly installed hard drives.

Recovering the unit

Provides steps for recovering the system to factory defaults or a previous state.

Troubleshooting

Overheating

Addresses issues related to the system overheating and its causes.

Service and repair

Decommissioning and disposal

Additional information

Additional documentation and client software

Directs users to resources for more documentation and software.

Support services and Bosch Academy

Provides links to support services and training resources.