DIVAR IP all-in-one 4000 Safety | en 7
Bosch Security Systems B.V.
Installation manual
2022-10 | V02 | F.01U.407.904
Warning!
Use only one hand when working with powered-on electrical equipment. This is to avoid
making a complete circuit, which will cause electrical shock.
Use extreme caution when using metal tools, which can easily damage any electrical
components or circuit boards they come into contact with.
1.4 ESD precautions
Notice!
Electrostatically sensitive device
Electrostatic Discharge (ESD) can damage electronic components. To avoid electrostatic
discharges, use proper CMOS/MOSFET protection measures.
– Do not use mats designed to decrease electrostatic discharge as protection from
electrical shock. Instead, use rubber mats that have been specifically designed as
electrical insulators.
– Use a grounded wrist strap designed to prevent static discharge.
1.5 Operating precautions
Notice!
Intended use
This product is for professional use only. It is not intended to be installed in a public area that
is accessible to the general population.
Notice!
Do not use this product in any humid or wet location.
Notice!
Take precautions to protect the device from power and lightning surges.
Notice!
Keep the area around the device clean and free of clutter.
Notice!
Enclosure openings
Do not block or cover the openings. Any openings in the enclosure are provided for ventilation
purposes. These openings will prevent overheating and ensure a reliable operation.
Notice!
Do not open or remove the device cover. Opening or removing the cover may cause damage
to the system and will void the warranty.
To Next Page
Loading...
Need help?
General
