Bosch DIVAR hybrid 3000 - Quick Menu

22 en | First time operation DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
2. Hold down the left mouse button while selecting a screen
area.
3. Release the button to zoom in on the selected area.
4. Right-click the mouse to exit the zoomed area.
5. Exit the zoom function by clicking on the icon again – it will
change back to .
Snapshot Make a snapshot of the current channel display. The system will
ask to export the snapshot to an email address, a USB memory
device, and/or a DVD:
Note: A disclaimer screen may initially appear when you first
select Snapshot (click <Accept> to continue).
Remote (not
shown in hybrid
models)
Directly open the camera configuration screen to assign a (new)
IP camera to this channel.
5.2 Quick menu
When in live viewing mode, right-click the mouse for the Quick menu. Options here are:
View 1, 4, 8, 9, 16, 32 - choose here the number of view windows shown on MonitorA (one-
window, four-windows, nine-windows, 16-windows or 32-windows). For each window view,
select also which channels (cameras) to display
View monitor B (optional) - a popup appears where you can assign the view windows and
channels for images to be shown on monitor B
Assign camera - assign the 1
st
or 2
nd
stream of a camera to the selected view window
Save View - save the current layout of view windows in a new view or overwrite an existing
view
Pan/Tilt/Zoom - only possible if you have a PTZ camera attached and configured
Dewarping - only possible if you have a panoramic camera attached and configured
– Choose: OFF, PTZ, Double panoramic, Corridor or Quad for dewarping in the recorder.
– If the camera supports it choose: Dewarping in camera or PTZ in camera
– Save, Load or Delete a dewarping view
Search/Play - search for records, and play/export them
Event search - search for events (alarms), and play/export them
Snapshot - make a snapshot of the current live camera images:
– A disclaimer screen may initially appear when you select Snapshot (click <Accept> to
continue).
– Choose to export the snapshot to an email address, a USB memory device, and/or a DVD.
Sequence on - activate a camera tour sequence on MonitorA (to disable the sequence, access
Quick Menu again and select ‘Sequence off’)
Alarm output - access the alarm output screen to configure the alarm output relays
Logout user - logout the current user (a popup appears to confirm logout)
Main menu - for settings and user modes
Notice!
The Pan/Tilt/Zoom setting applies for the currently selected channel. If you are in multiple-
window mode, the system automatically switches to the corresponding channel.