12
System Functions
Below is a summary of the features covered in this guide. Some of these functions may not be available in your menu. Access the menu by
pressing the [ESC] key. The first menu item, ALARM SILENCE ?, is displayed. This function can be selected by pressing the [ENT] key.
Doing this has the same effect as pressing the [ALARM SILENCE] key.
Pressing the [NEXT] key when ALARM SILENCE ? is displayed brings up the second menu item, which is TROUBLE SILENCE ?.
Pressing [NEXT] again displays the third item in the menu, DETECTOR RESET ?. Pressing [NEXT] once more displays the fourth
menu item, ANNUNCATOR RESET ?. These menu items perform the same functions as the first four keys on the command center.
Continue pressing the [NEXT] key to access special menu items that might be programmed into your system by your servicing company.
Pressing the [ENT] key while one of these items is displayed performs that function. Each of these functions is described in the following
pages:
Menu Item Function
1 ALARM SILENCE
2 TROUBLE SILENCE
3 DETECTOR RESET
4 ANNUNCIATOR RESET
5 VIEW MEMORY
6 FIRE TEST
7 VIEW LOG
8 REMOTE PROGRAM
9 DISPLAY REV
10 VIEW PT STATUS
To Next Page
Loading...
