4
Command Center Function Keys
Your command center has four function keys. These keys are used
to control your system.
ESC (Escape)
The [ESC] key has two functions. First, the [ESC] key is used to
enter the Menu. Pressing this key takes you to the first item in the
menu.
Second, pressing [ESC] takes you back to the idle display.
PREV (Previous)
When viewing a list, pressing the [PREV] key takes you back to the
previously shown item.
NEXT
Press the [NEXT] key to view the next item in a menu or list.
ENT (Enter)
The function of the [ENT] key is to select the menu item displayed.
Command Center Quiets for Keystrokes
Pressing [ESC], [PREV], [NEXT], or [ENT] lights the keys and
quiets any warning tones. If you don’t press another key within 20
seconds, the keypad lights go out and the warning tones resume.
To Next Page
Loading...
