25
REMO RESET - Panel reset from RAM.
RESTORAL - Restoral at device in area specified.
SDI FAIL - SDI device specified is not working. 1 to 8 =
supervised command centers, 017, 018, 019 = printers.
SDI RSTOR - The problem with SDI device specified resolved.
SENSOR - Event modifier for SENS RESET event. Shows the relay
number activated for reset.
SENS RESET - User reset area sensor in area specified. An event
modifier showing the relay number activated for reset follows this
event.
SKD CHG - User changed time for Sked specified to be executed.
SKD XEQ - Sked executed.
SKED - Event modifier for BYPASS, RELAY SET, and RELY RESET
events. Indicates function initiated by a SKED (scheduled event).
STAT RPT - Status report sent.
TEST RPT - Test report sent.
TIME CHG - User changed panel’s time.
TROUBLE - Trouble condition at point specified.
WALK END - Walk test in area specified completed.
WALK STRT - Walk test initiated in specified area.
WATCHDOG - Panel’s normal CPU operation interrupted and restarted.
Call for service if event occurs regularly or frequently.
To Next Page
Loading...
