Bosch FLEXIDOME panoramic 5100i User Manual (English)

Other manuals for Bosch FLEXIDOME panoramic 5100i

Questions and Answers:

K
Kathleen DuncanJul 29, 2025
What to do if Bosch FLEXIDOME panoramic 5100i Digital Camera is not operational after a firmware upload?
- R
  Rachel BerryJul 29, 2025
  If your Bosch Digital Camera unit isn't operational after a firmware upload, it might be due to a power failure during programming. In this case, have the unit checked by Customer Service and replace if necessary. Another reason might be an incorrect firmware file. To solve this, enter the IP address of the unit followed by /main.htm in your Web browser and repeat the upload, ensuring you only use CPP14 firmware files.
S
Shelby CostaAug 7, 2025
Why Bosch FLEXIDOME panoramic 5100i has no connection established and no image transmission?
- S
  Sonya GonzalezAug 7, 2025
  If your Bosch Digital Camera shows no connection and doesn't transmit images, it could be due to several reasons. First, the unit configuration might be incorrect; in this case, check all configuration parameters or reset to factory default if necessary. Second, the installation may be faulty; check the PoE. Third, a wrong IP address may be the cause, so check the IP addresses and try to ping. Fourth, faulty data transmission within the LAN could be the reason; check the data transmission with ping. Lastly, the maximum number of connections might have been reached; wait until there is a free connection and call the transmitter again.
J
Jessica PerezAug 18, 2025
What to do if web browser contains empty fields when using Bosch Digital Camera?
- A
  Ashley CoxAug 18, 2025
  If your web browser shows empty fields when using your Bosch Digital Camera, it's likely due to an active proxy server in your network. To resolve this, create a rule in the local computer's proxy settings to exclude local IP addresses.

Bosch FLEXIDOME panoramic 5100i Specifications

General

Camera Type	Panoramic
Aperture	F2.0
Field of View	360°
Video Compression	H.265, H.264, MJPEG
Power	PoE (IEEE 802.3af), 12 VDC
Ingress Protection	IP66
Impact Protection	IK10
Intelligent Video Analytics	Essential Video Analytics
Sensor Type	CMOS
Lens Type	Fixed
Day/Night	Yes
WDR	120 dB
Frame Rate	30 fps
Audio	Two-way audio support
Interface	RJ45 Ethernet
Power Supply	PoE