Bosch GLM400C - Tool Configuration; Language and Date;Time Settings; Unit and Angle Settings

25
“Tool Settings” Menu
Select the menu “Tool Settings” in the menu “Settings”.
Use button 4 [+] or 11 [–] to select the desired tool setting
and confirm with button 13 [Func]. Select the desired tool
setting.
To exit the “Tool” menu (o), press the On/Off/Clear button
9 [
] or soft key 12 [ ].
Tool Settings
Language
Time & Date
ft/m Measurement Unit
Angle Unit
TrackMyTools
Tool Information
Audio Signals
Shutdown Time
Dimming
Brightness
Auto Rotate
Setting the language
Select the language in the basic settings (general settings).
Set the required language and confirm by pressing button
13 [Func] or button 2 (measuring).
Setting the date and time
Select the date and time in the basic settings (general
settings).
Set the date and time and confirm by pressing soft key
12 [
].
2610049010 10-17 GLM400C.indd 25
11/3/17 1:09 PM