41
Maintenance and Service
Keep the measuring tool clean at all
times.
Do not immerse the measuring tool into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Take extra special care when cleaning the reception lens 20,
the laser beam exit opening 18 and the viewfinder 19:
Ensure that there is no lint on the reception lens, the laser
beam exit opening and the digital viewfinder. Clean the
reception lens, the laser beam exit opening and the viewfinder
only with cleaning agents which are also suitable for camera
lenses. Do not attempt to remove dirt from the reception lens,
the laser beam exit opening and the viewfinder using pointed
objects, and do not wipe over the reception lens, the laser
beam exit opening and the viewfinder (risk of scratching).
If the measuring tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an authorized after-sales service center for
Bosch power tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.
ENVIRONMENT PROTECTION
Recycle raw materials and batteries instead of
disposing of waste. The unit, accessories,
packaging and used batteries should be sorted for
environmentally friendly recycling in accordance with
the latest regulations.
To Next Page
Loading...
Need help?
General
