34
Bluetooth
®
Interface
Data Transmission to other Devices
The measuring tool is equipped with a Bluetooth
®
module,
which enables data transmission via radio technology to
certain mobile terminals/devices with a Bluetooth
®
interface
(e.g., smartphones, tablets).
For information on the necessary system requirements for a
Bluetooth
®
connection, please refer to the Bosch website at
www.bosch-pt.com
Further information can be found on the Bosch product
page.
For data transmission via Bluetooth
®
, time delays between
mobile terminal/device and measuring tool may occur. This
can be possible due to the distance between both devices or
the object being measured.
Activating the Bluetooth
®
Interface for Data Transmission
to a Mobile Terminal/Device
The Bluetooth
®
interface is activated in the basic settings. To
activate the Bluetooth
®
signal, press button 4 [+]. Ensure that
the Bluetooth
®
interface is activated on your mobile end device.
The special Bosch “Measuring Master” app is available to
extend the range of functions of the mobile end device and to
make data easier to process. You can download this from the
store for your end device type.
The connection between mobile terminal/device and
measuring tool is established after the Bosch application has
started. If multiple active measuring tools are found, select the
appropriate measuring tool using the serial number.
The connection status, as well as the active connection (f), are
shown in the display 1 of the measuring tool.
Deactivating the Bluetooth
®
Interface
The Bluetooth
®
connection is deactivated in the basic settings.
To deactivate the Bluetooth
®
signal, press button 11 [–] or
switch off the measuring tool.