Bosch HBC26D553 - Automatic Programmes; Setting a Programme

10
Setting the clock
So that you can set the clock, you must switch off the
appliance.
Example: changing from summer to winter time.
1.If required, press the % button to switch off the appliance.
2.Press the 0 button.
3.Switch to Clock using the rotary selector.
4.Press the X button and turn the rotary selector to change
the time.
5.Exit the time-setting options with the 0 button.
After a power cut
After a power cut "Clock" appears in the display. Press the
X button and turn the rotary selector to set the current time.
Exit the time-setting options with the
0 button. The time is
adopted.
Hiding the clock
When the appliance is switched off, the current time appears on
the display. You can hide the clock (see section: Basic
settings).
Automatic programmes
The automatic programmes make preparing food very easy.
There are 9 programme groups with a total of 40 programmes.
In this section, you will find out
■ how to set one of the automatic programmes
■ Hints and tips on the programmes
■ Which programmes you can set (programme tables)
Setting a programme
Select the correct programme from the programme table.
Follow the instructions for the programmes.
Example in the picture: You want to steam 500 g of fresh
chicken breast.
■ “Meat, poultry” programme group
■ “Chicken breast, fresh, steamed” programme
Selecting a programme group
1.Press the % button to switch on the appliance.
2.Press the` button.
“Programmes” appears in the display; the first programme
group, “Vegetables” is highlighted.
3.Turn the rotary selector until the required programme group
appears.
Selecting the programme
4.Press the X button.
The first programme of the selected programme group is
highlighted.
5.Turn the rotary selector until the required programme
appears.
Entering the weight
6.Press the X button.
The recommended weight is highlighted.
7.Turn the rotary selector to set the weight of the items to be
cooked.
Adjusting the cooking result individually
8.Press the X button.
The individual adjustment is highlighted “-
ÛÛÛÚÛÛÛ+”.
9.Turn the rotary selector to adjust the cooking result.
■ Anti-clockwise: set less intensive cooking result
■ Clockwise: set more intensive cooking result
You can also modify the cooking result permanently for all
programmes at the same time (see section: Basic settings)
10.Press the n button to start the programme.
The programme cooking time counts down on the display.
Setting a later end time
You can delay the end time for some programmes. The
programme will be started later and finish at the desired time
(see Section: Time-setting options).
Cancelling the programme
Press the
% button to cancel the programme and switch off the
appliance.
End of the programme
A signal sounds. Cooking has finished. Press the
% button to
switch off the appliance.
: Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Notes about the programmes
All programmes are designed for cooking on one level.
The cooking result can vary according to the size and quality of
the food.
Ovenware
Use the suggested ovenware. All meals have been tested using
this ovenware. The cooking result may change if you use
different ovenware.
When cooking in the perforated cooking container, also insert
the solid cooking container at level 1. Dripping liquid is caught.

7RSERWWRPKHDWLQJ

&

3URJUDPPHV
9HJHWDEOHV
6WHDP
FDXOLIORZHU

7RSERWWRPKHDWLQJ
&

3URJUDPPHV
0HDWSRXOWU\
&KLFNHQEUHDVW
IUHVKVWHDPHG

7RSERWWRPKHDWLQJ

&

3URJUDPPHV
&KLFNHQEUHDVW
J
IUHVKâVWHDPHG