8
2. Use the temperature selector to set the temperature or the
grill setting.
The oven heats up.
Switch off the oven
Turn the function selector to the off position.
Changing the settings
You can change the type of heating, temperature and grill
setting as required.
If the oven is to switch off automatically
Set the cooking time for your meal.
Example in the picture: Setting for
% Top/bottom heating,
190 °C, cooking time of 45 minutes.
1. The function selector is used to set the type of heating.
2. The temperature selector is used to set the temperature or
grill setting.
3. Press the 0 Clock button.
The
x Cooking time symbol flashes.
4. Use the @ or A button to set the cooking time.
Default value for the
@ button = 30 minutes
Default value for the
A button = 10 minutes
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
0 button
twice and switch off the function selector.
Changing the setting
Press the
0 Clock button. Use the + or - button to change the
cooking time.
Cancelling the setting
Press the
0 Clock button. Press the - button until zero is
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
Press the
0 Clock button twice and make your settings as
described in point 4.
If the oven is to switch on and off
automatically
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example in the picture: Setting for
% Top/bottom heating at
190 °C. It is 10:45 . The meal takes 45 minutes to cook and
should be ready at 12:45 .
1. The function selector is used to set the type of heating.
2. The temperature selector is used to set the temperature or
grill setting.
3. Press the 0 Clock button.
4. Use the @ or A button to set the cooking time.
5. Press the 0 Clock button repeatedly until the y End symbol
flashes.
You can see in the display when the meal will be ready.
6. Use the @ button to set a later end time.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
0 button
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
PLQ VHF
K
PLQ
PLQ VHF
K
PLQ
PLQ VHF
K
PLQ
PLQ VHF
K
PLQ