Bosch ICP-AMAX4-P2-EN - Page 25

Event Record Count per Set/Unset Period
Address 0201 Address Default
3 - 10 0201 10
EN=10
System Tamper Indication In Area
Address 0202 Address Default
0 = Area 1, 1 = All Areas 0202 0
Internal Siren Beep As Indication
Address
0203 Address Default
0=Disable, 1=enabled 0203 0
Battery Check Interval
Address
0204 Address Default
0 = Disabled , 1-15 minutes 0204 15
VDS-A
EN=15
Cross Zone Timer
Address
0205 - 0207 Address Default
001 - 999 seconds 0205 - 0207 060
AC Power Supply Fault Report Delay
Address
0208 - 0209 Address Default
99 = Disabled, 00 - 98 minutes 0208 - 0209 60
VDS-A
EN=00-60
Domestic Call Telephone Number
Address 1618 - 1682
Address Default
Domestic Call Telephone Number 1 1618 - 1633 15
Domestic Call Telephone Number 2 1634 - 1649 15
Domestic Call Telephone Number 3 1650 - 1665 15
Domestic Call Telephone Number 4 1666 - 1681 15
See Telephone Programming Parameters, page 26
If the default 15 is set to the initial digit of the telephone number, domestic telephone alarm
function is disabled; If set to other positions, it marks the end of the telephone number.
AMAX panel 4000 / AMAX panel 4000
EN
Configuration | en 25
Bosch Sicherheitssysteme GmbH Quick Start Guide 2013.07 | 03 | F.01U.267.113