Bosch ICP-AMAX4-P2-EN - Page 24

Remote Access To Panel When Panel Is Armed
Address 0180 Address Default
0 = Disable, 1 = Enable ; Default 1 0180 1
Keypad Language
Address 0181 Address Default
0 = Default, 1 = EN, 2 = DE, 3 = ES, 4 = FR, 5 = IT, 6 = PL,
7 = NL, 8 = SE
0181 0
Tamper Reset For User
Address
0182 Address Default
0 = Disable, 1 = Enable 0182 1
Arm / Disarm For Installer
Address
0183 Address Default
0 = Disable, 1 = Enable 0183 0
Zone Tamper Bypass when DEOL Zone is Bypassed
Address
0184 Address Default
0 = Disable, 1 = Enable 0184 1
0=Incert
– This function is only accessible in address programming
Call Back Setting
Address
0196 Address Default
0 = Disable, 1 = Enable 0196 0
Silence Warning Device On Disarm
Address
0197 Address Default
0 = Disable, 1 = Enable 0197 1
Zone Pulse Count Duration
Address
0198 - 0200 Address Default
0 = Disable, 1-999sec = Duration 0198 - 200 060
VDS-A
EN=000
24
en | Configuration
AMAX panel 4000 / AMAX panel 4000
EN
2013.07 | 03 | F.01U.267.113 Quick Start Guide Bosch Sicherheitssysteme GmbH