ICP-CC488 | User's Guide | 1. Introduction EN | 5
Bosch Security Systems, Inc. | 12/08 | F01U089456-02
1. Introduction
Congratulations on selecting the ICP-CC488 Control
Panel to protect you and your property. To obtain
the most from your unit, take time to read through
this manual and familiarize yourself with the
numerous outstanding operating features of this
system. In all aspects of planning, engineering,
styling, operation, convenience, and adaptability, we
have sought to anticipate your every possible
requirement.
Programming simplicity and speed were some of the
major considerations and we believe that our
objectives in this area were more than satisfied.
This manual explains all aspects of operating the
control panel. All system parameters and options are
detailed; however, suitability is left up to the
individual. Every system can be tailored to meet all
requirements quickly and easily.
2. Specifications
Table 1: Specifications
Temperature Range
0
o
C to +45
o
C
(+32
o
F to +113
o
F)
Humidity
10% to 95%
Power Source
TF008 Plug Pack –
240 V/18 VAC @ 1.3 A
Stand-By Current
65 mA
Current Draw in
Alarm Condition
115 mA
Current Draw in
Alarm Condition with
Codepad
105 mA
Back-Up Battery
6 Ah/12 VDC Rechargeable
Sealed Lead Acid Battery
Dimensions (Case,
packed in carton)
306 mm x 262 mm x 84 mm
(12.05 in. x 10.31 in. x 3.31 in.)
Weight
2.5 kg
(5.51 lb.)
Supplier Code
N771
New Zealand
Telepermit
PTC 211/98/084
ICP-CC488 –
PTC 211/98/083
Test the sirens, strobe, and zones at
weekly intervals. Refer to Section 14.
Testing for further information.
3. Codepad Indicators
Figure 1: ICP-CP508W Eight Zone LED
Codepad
Figure 2: ICP-CP508LW Eight Zone LCD
Codepad
Figure 3: ICP-CP516 Sixteen Zone LED
Codepad
To Next Page
Loading...
