Troubleshooting
14 Troubleshooting
You
can resolve minor faults with the device yourself. Before contacting customer
service, please refer to the troubleshooting information. This way you avoid
unnecessary costs.
WARNING
Risk of electric shock! Improper repairs
are dangerous.
▶ Only
trained specialist personnel may carry out repairs on the device.
▶ Only original spare parts may be used to repair the device.
▶ If the power cord of this appliance becomes damaged, it must be replaced by
the manufacturer, its service agent or a similarly qualified person to avoid
hazards.
Malfunction Cause
and troubleshooting
Device does
not cool,
indications and lights
are on.
The presentation light is turned on.
1.Switch off the device. →
Page 16
2.Wait 2 minutes.
3.
Switch the device back on. →
Page 16
4.Wait 1 minute and then press and hold until 4
acoustic signals sound.
5.
After a short time, check whether your device is cooling.
in-
LED lighting does not
function.
Various causes are possible.
▶ Contact
the service department.
The
number of the service department can be found in the
attached overview of service departments.
Side panels of the
device are warm.
No malfunction. Pipes run in the side walls which
become warm during the cooling process. Furniture
placed against the appliance will not be damaged by the
heat.
No action required.No action required.
Temperature displays
and to
burn.
A sensor is defective.
▶ Contact
the service department.
The
number of the service department can be found in the
attached overview of service departments.
A warning signal
sounds, the
set temperature
ture (refrigerator compartment) and
flashing.
Refrigerator compartment door is open.
▶ Close the refrigerator compartment door.
24
To Next Page
Loading...
