MIC400 Series Camera | Installation and Operation Manual AAAEN | 63
Bosch Security Systems Issue 1
Appendices
Appendix A – Protocol Preset codes
PRESET CODES
Pelco
MULTI_ALARM_PRESET 16 // 16 to 24
NORMAL_TILT_LIMIT_PRESET 26
IR_LAMP_TILT_LIMIT_PRESET 27
BAUD_2400 28
TILT_REVERSE_PRESET 29 // toggle
IMAGE_FLIP_PRESET 30 // toggle
REMAP_AN_AUX 31
PHOTOCELL_IR_ON_PRESET 32
PHOTOCELL_IR_OFF_PRESET 33
AUTOHOME_SEQUENCE_PRESET 35
AUTOHOME_OFF_PRESET 36
AUTO_IR_ON_PRESET 37
AUTO_IR_OFF_PRESET 38
CANTED_PRESET 39
BAUD_9600 40
BAUD_4800 41
WASHWIPE_PRESET 42
AUTO_ALARM_GOTO_PRESET 43
FIND_END_STOPS 45
SEQUENCE_RECORD_PRESET 48
SEQUENCE_RECORD_STOP_PRESET 49
SET_TOUR1_PRESET 50
// 51
// 52
// 53
// 54
SET_TOUR6_PRESET 55
AUTO_ALARM_ON_PRESET 56
AUTO_ALARM_OFF_PRESET 57
AUTO_LOWLIGHT_ON_PRESET 58
AUTO_LOWLIGHT_OFF_PRESET 59
ADDRESS_CHANGE_PRESET 60
PRIVACY_PRESET_START 61
PRIVACY_PRESET_END 75
AUTOFLIP_ON_PRESET 76
To Next Page
Loading...
