Bosch MIC400 PTZ - Page 65

MIC400 Series Camera | Installation and Operation Manual AAAEN | 65
Bosch Security Systems Issue 1
PRIVACY_CLEAR_CENTRAL 67
PRIVACY_SHOW_CURSOR 66
PRIVACY_HIDE_CURSOR 65
PRIVACY_SAVE_PARAMETER 64
PRIVACY_LOAD_PARAMETER 63
PRIVACY_INIT_PARAMETER 62
PRIVACY_SET_CURSOR 61
CAMERA_COMMAND_PRESET1 240
CAMERA_COMMAND_PRESET10 250
RESET_PRESETS_PRESET 255
360 Vision
WASHWIPE_PRESET 64
AUTO_ALARM_GOTO_PRESET 65
WIPE_ON 66
WIPE_OFF 67
ON_SCREEN_DSIPLAY_TOGGLE 68
WASH_START_PRESET 69
WASH_FINISH_PRESET 70
MULTI_ALARM_PRESET 50 // allow up to 12 alarms
now.
FIND_END_STOPS 98
SHOW_STARTUP_MESS 99
SPECIAL SETUP PRESETS
PICTURE_FLIP_MIRROR_ON_PRESET 188
PICTURE_FLIP_MIRROR_OFF_PRESET 189
TILT_REVERSE_ON_PRESET 190
TILT_REVERSE_OFF_PRESET 191
PHOTOCELL_IR_ON_PRESET 192
PHOTOCELL_IR_OFF_PRESET 193
PAN_REVERSE_ON_PRESET 194
PAN_REVERSE_OFF_PRESET 195
AUTO_IR_ON_PRESET 196
AUTO_IR_OFF_PRESET 197
INTERMITANT_WIPE_ON_PRESET 198
INTERMITANT_WIPE_OFF_PRESET 199 //defines for limit setting
presets
SOFTLIMIT_TOP_LEFT_PRESET 200 // Always lowest number
SOFTLIMIT_BOTTOM_RIGHT_PRESET 201
NONDWELL_TOP_LEFT_PRESET 202
NONDWELL_BOTTOM_RIGHT_PRESET 203 // Alway highest number
AUTOHOME_PRESET1_PRESET 204