en | 47
7 620 210 017 | 11.2013Robert Bosch Car Multimedia GmbH
en
Scanning tracks (SCAN)
To play the tracks in the MP3 data carrier in
ascending order for about to 10 seconds each,
f Press the 4 : button repeatedly until
"SCAN TRK" appears on the display.
To sample all the tracks in the current direc-
tory,
f Press the 4 : button repeatedly until
"SCAN FLD" appears on the display.
Ending SCAN
In order to stop sampling the tracks
f Press the 4 : button repeatedly until
"SCAN OFF" appears on the display.
The currently scanned track will then continue
to be played normally.
Repeating individual tracks or
whole directories (RPT)
To repeat the current track,
f Press the 2 : button repeatedly until
"RPT TRK" appears in the display.
The RPT symbol appears on the display.
To repeat the current directory,
f Press the 2 : button repeatedly until
"RPT DIR" appears in the display.
The RPT symbol appears on the display.
Exiting RPT
To stop repeating the track,
f Press the 2 : button repeatedly until
"RPT OFF" appears in the display.
The RPT symbol on the display disappears.
Pausing during play (PAUSE)
f Press the 1 : button.
The display shows "PAUSE".
Continuing after the pause
f Press the 1 : button during the pause.
Play continues.
Playlist mode (PLST)
To switch to playlist mode,
f long press the TA ; button.
“PLST ON” appears briefly in the display. Now
only playlists stored on the MP3 storage device
are played.
To switch from playlist mode to normal MP3
mode,
f long press the TA ; button.
“PLST OFF” appears briefly in the display. Now
only tracks stored on the MP3 storage device
are played, but no playlists.
USB operation
02_MR12_en.indd 47 25.11.13 16:23
To Next Page
Loading...
