To Next PageTo Next Page
Need help?Do you have a question about the Bosch Performance BDU450 CX and is the answer not in the manual?
General| Model | BDU450 CX |
|---|---|
| Wattage | 250 W |
| Output Power | 250W |
| Torque | 75 Nm |
| Max. Support | 300% |
| Walk Assistance | Yes |
| Weight | 2.9 kg |
| Operating Voltage | 36 V |
| Maximum Speed | 25 km/h |
| Protection Class | IP54 |
| Series | Performance |
| Generation | 4 |
Information regarding data transfer to Bosch eBike Systems for product improvement.
Defines the exclusive purpose of the drive unit for eBike propulsion.
Highlights how illustrations may differ from actual conditions based on eBike equipment.
Presents detailed technical specifications for the drive units.
Information on voltage compatibility for bicycle lights powered by the eBike system.
Instructions for safely inserting and removing the eBike battery.
Guidelines for fitting and checking the speed sensor and spoke magnet.
Requirements for activating the eBike system and initial setup.
Describes the methods for powering the eBike system on and off.
Explains the integration of electronic gear-shifting systems into the eBike system.
Details how to adjust the motor's assistance level via the on-board computer.
How to activate and use the walk assistance function for pushing the eBike.
Instructions for operating the front and tail lights via the on-board computer.
General advice and important considerations for riding an eBike.
Advises on optimal gear-shifting techniques for eBike use.
Recommendations for new users to get familiar with the eBike system.
Explains factors affecting the eBike's operational range on a single charge.
Guidance on regular checks and professional servicing for the eBike system.
Information on obtaining support and advice for the eBike system.
Proper procedures for environmentally friendly disposal of eBike components.
