Bosch Classic+ Line 0 275 007 003 User Manual

Robert Bosch GmbH
Bosch eBike Systems
72703 Reutlingen
GERMANY
www.bosch-ebike.com
M 275 007 003 (2014.10) T / 27
Classic+ Line
Montageanleitung Drive Unit
0 275 007 003 | 0 275 007 006 | 0 275 007 007
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing

Bosch Classic+ Line 0 275 007 003 Specifications

General

Category	DC Drives
Part Number	0 275 007 003
Line	Classic+
Speed Range	0 - 3000 rpm
Output Current	10 A

Summary

Safety and General Information

Disassemble Chain Ring

Steps for removing the chain ring, including tools and attention points.

Disassembling the Drive Unit

Dismantle Stone Guard and Unplug Cables

Instructions for removing the stone guard and disconnecting cables.

Disassemble Drive Unit from Frame

Steps to remove the drive unit from the bicycle frame.

Installing the Drive Unit

Install Drive Unit into Frame

Guide for inserting the drive unit and fastening screws.

Connecting Cables and Guards

Connect Cables to Drive Unit

Details on connecting electrical cables to the drive unit correctly.

Lay Cables and Fit Stone Guard

Instructions for routing cables and reattaching the stone guard.

Install Chain Guard Adapter (Optional)

Steps for fitting an optional chain guard adapter.

Mounting Chain Ring and Cranks

Mount Chain Ring and Spider

Procedure for assembling the chain ring and its spider.

Install Chain Ring and Cranks

Steps for attaching the chain ring, spider, and cranks to the drive unit.