English | 25
Stake out function (see figureK)
The stake out function repeatedly measures a defined length (distance). These lengths
can be transferred to a surface, for example to enable material to be cut into pieces of
equal lengths or to install stud walls in a drywall construction. The minimum adjustable
length is 0.1 m and the maximum length is 50 m.
Note: The distance from the marking is shown in the display in the stake out function.
The reference is not the edge of the measuring tool.
Select the stake out function .
Use the button (6) [+] or the button (3) [–] to set the required length.
Begin the stake out function by pressing the measuring button (5) [ ] and slowly move
away from the starting point.
The measuring tool continuously measures the distance to the start-
ing point. The defined length and the current measured value are
thereby displayed. The lower or upper arrow displays the shortest
distance to the next or last marking.
The left factor specifies how many times the defined length has
already been reached. A green measured value indicates that a length
has been reached for marking purposes.
A blue measured value indicates the actual value when the reference
value is outside the display.
Grade measurement/digital spirit level
Select the inclination measurement/digital spirit level .
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination exceeds 3°, the ball in the display lights up red.
Grade measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level
for grade measurement.
Bosch Power Tools 1 609 92A 62A | (21.12.2020)
To Next Page
Loading...
